Friday, September 6, 2019
Is there a benefit in bonding amalgam restorations to remaining tooth structure Essay Example for Free
Is there a benefit in bonding amalgam restorations to remaining tooth structure Essay The use of bonded amalgam in restoring the teeth began as early as the 1990ââ¬â¢s when a few practitioners began to use certain substances to bond the amalgam restorations directly to the tooth. These practitioners began to bond the amalgam directly to the enamel and/or the dentin. The process of bonding amalgam to the tooth was fairly simple. First, the cavity was prepared and the surface of the cavity was thoroughly cleansed, washed and dried. An etchant was applied to the surface of the cavity, and etching was done for certain period of time. Then, a bonding agent was applied to the surface of the prepared cavity. This bonding agent was chemically cured. After this, amalgam can be condensed into the cavity. The resin can whilst curing, bond the magma to the tooth. A mechanical interlocking between the amalgam and the resin would develop. Such restorations would have a lot of advantages over conventional amalgam restorations. However, the evidence available currently regarding bonded amalgam is rather insufficient, as the results of long-term studies are lacking. Studies for a period of two years following the insertion of bonded amalgam have been conducted, and benefits predicted on a long-term basis needs to be thoroughly tested (Bryant, 1998). The use of bonding agent for dental amalgam was first thought of immediately after composite resins were successfully bonded clinically. One of the most frequently utilized agents for bonding amalgam to the tooth structure is 4-META. This enables bond shear strength of about 10 MPa. On the other hand, if the same agent is utilized to bond composite resins to the tooth structure, a bond strength of about 20 MPa is achieved (Graig, 2002). One of the main reasons why dental researchers began to work on the use of bonded amalgams for clinical use was because the newer restorative material have not been very successful in replacing dental amalgam. During the early days when bonded amalgams were initially tested, researchers were able to notice that bonding helped to provide certain benefits against unbonded amalgams (Zbynek, 2002). Bonded amalgam restorations claim several benefits:- 1. The retention form of a cavity may be improved following use of bonded amalgam (Bryant, 1998). However, some researchers feel that the bond retention offered by bonding amalgam be very less or even negligible. This is because the bonding agent may not adopt in a proper manner to the surface of the cavity or the amalgam (Graig, 2002). 2. There is no much of need to cut the tooth extensively and to prepare several retentive features such as grooves, dove tails, undercuts, etc. 3. As the tooth is prepared conservatively, the resistance form of the tooth is improved. This means that the restoration can tolerate stresses better that could fracture the cusps. The clinical evidence available for this in the form of clinical trials is rather insufficient in this regard (Bryant, 1998). Studies have shown that in a MOD (class VI) cavity prepared with amalgam, the resistance to fracture was more than doubled when a bonding agent was utilized, compared to in situations when a bonding agent was not utilized. The case of the improvement in the facture strengths of bonded amalgam was comparable to that of bonding composite resins. The fracture strength achieved by bonding composites was similar to that of bonding amalgam in case of MOD restorations. However, in both cases, the resistance to fracture was as not as high as that of normal tooth material. The fracture resistance depended on several factors such as the amount of tooth material cut, the width of the proximal box, etc. Studies have shown that as the width of the restoration is increased, the resistance to fracture decreases. Research has also demonstrated that the retention obtained by bonding amalgam for MOD cavities was similar to that of placing pin-retained restorations. Hence, the potential to use bonded amalgam instead of pin-retained restorations could be considered. However, long-term studies in this regard have not been considered (Graig, 2002). Some other situations in which bonded amalgam restorations could be useful include large cavity preparations in posterior teeth (as the extent of the cavity preparation would reduce) and in class V cavities in which the occluso-gingival height is reduced, as the need for pins is eliminated (Zbynek, 2002). 4. As the tooth is cut to a conservative extent, and the need to build several retentive features is reduced, the chances of the patient developing post-operative hypersensitivity are greatly reduced. Besides, the resin bonding agent tends to seal the dentinal tubules and prevent the excessive drying (Zbynek, 2002). However, several other factors plays a very important role in preventing the development of hypersensitivity including the extent to which the amalgam is condensed, excessive drying of the tooth, the experience and the technique utilized by the dental practitioner, etc (Bryant, 1998). 5. Bonding agents help to improve the marginal seal and reduce the microleakage in a dental amalgam restoration. The gap present between the tooth and the amalgam is reduced thus lowering the microleakage (Zbynek, 2002). The fluid flow into the cavity is either abolished to decreased (Graig, 2002). Besides, the dentinal tubules are sealed to a greater extent, which could reduce and prevent damage to the pulp (Bryant, 1998). The microleakage is frequently measured using the dye leakage technique (Cenci, 2004). 6. The bonding strength between the tooth surface and the restoration is increased when an amalgam bonding agent is utilized. Studies have shown that the bond strength that develops when no bonding agent is utilized is about 4 to 8 MPa. However, when a bonding agent is utilized, the bond strength shoots up to about 20 MPa (Graig, 2002). 7. The rate of secondary caries is reduced (due to better marginal integrity and reduced marginal leakage) (Zbynek, 2002).
Thursday, September 5, 2019
The simplest form of bridge the beam bridges
The simplest form of bridge the beam bridges Beam Bridges The beam type of bridge is by far the simplest and the beam type of bridge is also the most common. You probably see beam bridges often. A beam bridge is just a beam supported by pillars or columns. Materials and Construction Beam bridges are commonly built from concrete. Beam bridges are also made of steel, or a mixture of steel and concrete. They often are made in sections, or boxes, where they are attached at the site of the bridge. The boxes are made out of steel and concrete or just concrete. Arch Bridge: In this type of bridge, the weight is carried outward along two curving paths. The points where the arch reaches the ground keep the bridge up by resisting the outward thrust. The roadway is located on top of the arch. Suspension Bridges: Suspension bridges bridge the unbridgeable. In a suspension bridge, cables which are suspended via towers which support them hold up the road deck. The weight is transferred by the cables to the towers, which then in turn transfer the weight to the ground. Materials and Construction The amount of towers on suspension bridges can vary, but a suspension bridge MUST have at least two towers. When possible, these towers are built on ground. However, there are methods for making floating towers that are secured. Towers are usually built with hollow steel boxes, but some are built with concrete. Cantilever Bridge: Cantilever bridges depend on counterbalances. Counterbalances are weights used to balance another weight. They consist of two or more (which many cantilever bridges have at least four) arms that equally balance each other, almost like a perfectly balanced see-saw. Often, the part of the bridge that leads to the first cantilever is just a beam bridge. Materials and Construction Some use one arch to connect (and essentially act as) the arm. Others just have arms and a roadway, or arms, a roadway, and cables that work like a cable-stayed bridge. Cantilever bridges are built in a way similar to beam and arch bridges, depending on how the bridge is designed. Truss Bridge: A truss bridge is a bridge composed of connected elements (typically straight) which may be stressed from tension, compression, or sometimes both in response to dynamic loads. Truss bridges are one of the oldest types of modern bridges. The basic types of truss bridges shown in this article have simple designs which could be easily analysed by nineteenth and early twentieth century engineers. A truss bridge is economical to construct owing to its efficient use of materials. Our bridge design: Our bridge design is modelled after the Warren truss bridge design. The project has a light weight design; this is to ensure not to go over the weight requirement. This structure is easy to construct and, shown by the force analysis, can distribute loads efficiently.
Wednesday, September 4, 2019
Animal Behavior: Pillbugs and Their Preferences
Animal Behavior: Pillbugs and Their Preferences The organism used in this experiment is Armadillidium vulgare which is commonly called a pillbug, sowbug, or roly-poly. The pillbug belongs to the Kingdom Animalia, Phylum Arthropoda, Class Crustacea, and Order Isopoda. To understand this experiment it is important to have some knowledge of the organism being observed. The pillbug is an isopod. The pillbug is made up of three body parts. They are the head, thorax, and abdomen. This organism has two pairs of antennae (one prominent and one inconspicuous), simple eyes, seven pairs of legs, seven separate segments on the thorax, and paired appendages at the end of the abdomen called uropods. The color varies from dark gray to white with pattern or white without pattern. Male and female pillbugs differ in that a female has leaf-like growths at the base of some of its legs. The purpose of these pouches is to hold developing eggs and embryos. Males differ in that the first two appendages on their abdomens are elongated copulatory organs. T he immature isopod looks like an adult, save for its size, proportion, color, and sexual development. The pillbug is of the Order Isopoda. Isopods feed on dead or decaying plants or animals. Some isopods may eat living plants. They breathe with gills, and therefore their habitats are places of high humidity. During the day, pillbugs hide in moist places, such as under stone and bark. The organism being observed reproduces on land instead of in water. The eggs develop in a brood pouch filled with fluid. This organism produces between one and two broods. This depends upon the females size and condition. The female may stop growing under stress. This decreases the likelihood of reproducing more than once. The pillbug society is patriarchal. The burrow in which a pillbug family lives is guarded by the father. Both the father and mother gather the food. The entire pillbug family cleans the burrow. The young set out in February to create families of their own. Pillbugs are known for their defense mechanism of curling up into a tight ball. As for the impact of isopods impact on the ecosystem, there are both positive and negative effects. Isopods cause minimal soil improvement and provide a food source for other animals. Large populations of isopods can eat and cause damage to plants. The role of the pillbug in the ecosystem is breaking down dead plants and animals. Pillbugs that live in gardens help the circulation of soil, but its possible they will eat small plants as they germinate. Overall, pillbugs have a small impact on the ecosystem. To understand this experiment it is also important to be somewhat knowledgable on ethology, the study of animal behavior. Behavior is defined as an animals response to sensory input. There are two categories that a behavior can fall into. They are learned and innate. The behavior that places an animal in its favorite environment is called an orientation behavior. When an animal moves toward or away from a stimulus, it has exhibited taxis. Light, heat, moisture, sound, or chemicals are often the stimuli that cause taxis. Random movement that does not result in orientation with respect to a stimulus is known as kinesis. Another type of behavior is Agnostic behavior. This is exhibited when animals respond to one another by aggressive or submissive responses. The pH of soil varies depending on the soils condition. There are plants that grow best when the soil is acidic, and there are some plants that grow best when the soil is basic. Most plants, however, show the best growth in areas where the pH ranges from 6.5 to 7.2, 7 being neutral. Hydrochloric acid and Sodium Hydroxide have pHs at the extremes of the pH scale. The pH of Hydrochloric acid, HCL, (0.1 M) is about 1.1. Sodium Hydroxide, KOH, (0.1 M) has a pH of about 13.5. Detritus is what isopods feed on, and it as a more acidic pH. When organic matter decays, H ions are produced. Therefore, acid is added to the soil. Generally, the acidity limit for plants is no lower than approximately 4.5 to 5.6 on the pH scale. The vapor pressure of a liquid refers to the idea that, in a closed container, evaporation will continue until equilibrium is reached. The vapor pressure of HCl and water are approximately equal (20 mmHg at room temperature, 22 C), and the vapor pressure of KOH for a 45% so lution is approximately 2 mmHg. The purpose of this experiment was to use pillbugs to examine animal behaviors and habitat preferences and to determine whether this organism prefers moist or dry habitats, dark or light habitats, and acidic or caustic environments With knowledge of isopods and pillbugs, it was hypothesized that the pillbugs would spend more time near the damp filter paper because of their need for high humidity in order to breathe. Given that pillbugs live under rocks and feed on decaying organisms, which release acid into the soil, it was also hypothesized that they would prefer the dark rather than light conditions and the acidic over the caustic environment. Materials and Methods Water Pipet Filter Paper (2 pieces) Choice Chamber Scissors Soft Brush 10 Pill Bugs Stopwatch To observe pill bugs and their preference moist versus dry conditions, a choice chamber, consisting of two petri dishes connected to one another, was obtained and lined with filter paper. Two pieces of filter paper were cut to fit the chambers. One was then moistened, using a pipette, with a few drops of water. The second piece of circular filter paper was left dry. The moistened filter paper was placed at the bottom of one chamber, chamber 1, and the dry filter paper was placed at the bottom of the other, chamber 2. Then, using a soft brush, ten pill bugs were obtained from the stock of pill bugs, and then placed into the chambers. Also using a soft brush, five pill bugs were placed in the dry chamber while the remaining five were placed in the moist chamber and the chambers were closed. This pillbug count for each chamber was then recorded for time zero minutes. Using the stopwatch to track time, the count of pill bugs on each side of the choice chamber was then recorded every 30 s econds for ten minutes, and continued even when some may no longer have been moving or were all on one side. Notes were taken on the actions and interactions of the pill bugs throughout the ten minute period. Once ten minutes had elapsed, the pill bugs were returned to the stock culture. Black Paper White Filter Paper Choice Chamber 10 Pill Bugs Soft Brush Scissors Stopwatch To determine the preference of pill bugs between light and dark habitats and conditions, a choice chamber with two connecting petri dishes was lined with two different types of paper. One piece of normal filter paper and one piece of black paper were both cut to fit the chambers. Next, the bottom of the inside of one dish, chamber 1, was covered with the unaltered, white filter paper and the other dish, chamber 2, was lined with the black paper. Then, using a soft brush, ten pill bugs were obtained from the pill bug stock culture, five of which were placed in the black-paper lined chamber and the remaining five were placed in the white paper lined chamber. The choice chamber was then closed. The initial pill bug count, 5 in each chamber was then recorded in the table. For a period of ten minutes, using a stopwatch to track time, the count of the pill bugs on each side of the choice chamber was recorded every thirty seconds. In addition, notes about the interactions of the pill bugs w ere taken throughout the ten minute period. The count continued to be taken, regardless of the lack of movement from the pill bugs or the concentration of all ten in one chamber. After the ten minutes had elapsed, the pill bugs were returned to the stock culture. White Filter Paper (2 pieces) 0.1 M HCl (Hydrochloric Acid) 0.1 M KOH (Potassium Hydroxide) Pipettes (1 or 2) Filter Paper (3 Pieces) 3 Choice Chamber 10 Pill Bugs Scissors Stopwatch To determine and see the preference of pill bugs in terms of basic and acidic conditions, a 3-choice chamber was set up. Three pieces of filter paper were cut to fit the chambers. Using a pipette, about four drops of 0.1 M HCl were placed in a circular pattern about the paper. Another piece of filter paper was sprinkled with 0.1 M KOH in the same manner as was done with the hydrochloric acid. The HCl and KOH were applied to the filter paper in such a way that the paper was not drenched in the chemical. One chamber, the one connected to two other chambers was lined with an unaltered piece of filter paper. One of the two remaining chambers, chamber 1, was lined at the bottom (inside bottom) with the acidic filter paper and the remaining chamber, chamber 3, was lined at the bottom with the basic filter paper. Using a soft brush, the ten pill bugs were all removed from the stock culture and placed in chamber 2, the middle chamber consisting of the unaltered paper. The chambers were then covered and the pill bug count was recorded in the table for the initial time of 0 minutes. For the next ten minutes, the count of pill bugs in each of the three chambers was recorded every thirty minutes. The data continued to be collected even when they were no longer moving sides or were all on one side. After the ten minutes had elapsed, the ten pill bugs were returned to the stock culture. Results Table 1: Number of Pillbugs in Wet vs. Dry Chambers at Various Times Time (min.) Number in Wet Chamber Number in Dry Chamber Other Notes 0 5 5 Begin moving instantly 0.5 2 8 Large number shifts together to one side 1 1 9 One more baby follows 1.5 3 7 Fighting between two larger isopods 2 5 5 Even out again 2.5 5 5 Move about but come back to even; one not moving 3 6 4 More to wet chamber 3.5 4 6 Back to Dry Chamber 4 5 5 Crawling on underside of paper 4.5 4 6 Fighting to get from one side to another 5 3 7 Large pillbug still not moving 5.5 6 4 Other pillbugs begin gathering around non-moving pillbug 6 7 3 Pillbugs piled on top of one another 6.5 5 5 Pillbug begins to move again 7 4 6 More to Dry Chamber 7.5 5 5 Back at even 8 6 4 Continual switch from chamber to chamber 8.5 7 3 Begin gathering at wet chamber 9 9 1 More join wet chamber 9.5 7 3 Crowded, a few go to dry chamber 10 9 1 Return to wet chamber Table 2: Number of Pillbugs in Lighter vs. Darker Colored Chambers at Various Times Time (min.) Number in Light Chamber Number in Dark Chamber Other Notes 0 5 5 Begin moving instantly 0.5 3 7 Move to dark side 1 2 8 More to dark side 1.5 2 8 Remain, no overall movement 2 2 8 No overall movement 2.5 3 7 Begin going to white side 3 3 7 No overall movement 3.5 4 6 Moving to lighter side 4 2 8 Move to dark side 4.5 5 5 Equalize again 5 3 7 Fighting to get to dark side 5.5 5 5 Equalize again 6 4 6 More to Dark side 6.5 7 3 Piling up to get to lighter side 7 7 3 No overall movement 7.5 8 2 More in lighter side 8 9 1 More in lighter side 8.5 7 3 Move to dark side 9 5 5 Equalize again 9.5 3 7 Move to darker side 10 4 6 Young follows adult to other side Table 3: Number of Pillbugs in Neutral, Acidic and Basic Chambers at Various Times Time (min.) Number in Neutral Chamber (Control) Number in Acidic Chamber Number in Basic Chamber Other Notes 0 10 0 0 Immediate Movement 0.5 2 5 3 Move to acidic 1 3 5 2 Stay around outside of chamber 1.5 6 2 2 Quickly out of acidic and into neutral area 2 4 3 3 More to basic area 2.5 5 2 3 Away from acidic area 3 2 3 5 More slowly moving to basic area 3.5 2 1 7 Movement to basic chamber 4 4 0 6 Pillbugs all out of Acidic area 4.5 1 1 8 Most in Basic area 5 1 4 5 Some return to acidic chamber 5.5 3 1 6 Slowly moving out of Acidic chamber and into neutral and basic chambers 6 4 1 5 Out of basic and into neutral 6.5 3 1 6 Back into basic area, around outside of filter paper 7 3 1 6 No overall movement 7.5 4 0 6 All gone from acidic area 8 3 0 7 More to basic area 8.5 4 0 6 Small shift 9 3 0 7 Reverse of shift 9.5 2 0 8 More to basic area more slowly than before test 10 1 0 9 More to basic area Figure 1: Fluctuation in Number of Pillbugs in Wet and Dry Chambers Figure 2: Fluctuation in Number of Pillbugs in Lighter and Darker Colored Chambers Figure 3: Fluctuation in Number of Pillbugs in Acidic, Neutral and Basic Chambers Discussion Table 4: Average Number of Pillbugs in Wet vs. in Dry Chambers Time (min.) Number in Wet Chamber Number in Dry Chamber Average # of Pill Bugs in Wet Average # of Pill Bugs in Dry 0 5 5 0.5 2 8 1 1 9 1.5 3 7 2 5 5 2.5 5 5 3 6 4 3.5 4 6 4 5 5 4.5 4 6 5 3 7 5.5 6 4 6 7 3 6.5 5 5 7 4 6 7.5 5 5 8 6 4 8.5 7 3 9 9 1 9.5 7 3 10 9 1 Total # of Pill bugs 108 102 5.143 4.857 Table 5: Average Number of Pillbugs in Lighter vs. Darker-Colored Chambers Time (min.) Number in Light Chamber Number in Dark Chamber Average # of Pill Bugs in White (Light) Average # of Pill Bugs in Dark 0 5 5 0.5 3 7 1 2 8 1.5 2 8 2 2 8 2.5 3 7 3 3 7 3.5 4 6 4 2 8 4.5 5 5 5 3 7 5.5 5 5 6 4 6 6.5 7 3 7 7 3 7.5 8 2 8 9 1 8.5 7 3 9 5 5 9.5 3 7 10 4 6 Total # of Pill Bugs 93 117 4.429 5.571 Table 6: Average Number of Pillbugs in Neutral, Acidic and Basic Chambers Time (min.) Number in Neutral Chamber Number in Acidic Chamber Number in Basic Chamber Average # of Pill Bugs in Neutral Chamber Average # of Pill Bugs in Acidic Chamber Average # of Pill Bugs in Basic Chamber 0 10 0 0 0.5 2 5 3 1 3 5 2 1.5 6 2 2 2 4 3 3 2.5 5 2 3 3 2 3 5 3.5 2 1 7 4 4 0 6 4.5 1 1 8 5 1 4 5 5.5 3 1 6 6 4 1 5 6.5 3 1 6 7 3 1 6 7.5 4 0 6 8 3 0 7 8.5 4 0 6 9 3 0 7 9.5 2 0 8 10 1 0 9 Total # of Pill Bugs 70 30 110 3.33 1.429 5.238 Figure 4: Comparison of Average Number of Pillbugs in Wet Chamber vs. in Dry Chamber Figure 5: Comparison of Average Number of Pillbugs in Lighter-colored and Dark-colored Paper Figure 6: Comparison of Average Number of Pillbugs in Acidic, Neutral and Basic Chambers It was hypothesized that the pillbugs, given that they possess gills for respiration, and that they live where there is not a lot of light (under rocks and logs), they would prefer the damp chamber over the dry chamber and the dark chamber over the light chamber. Knowing that pillbugs feed off of decaying organic material, and the process of decay increases the soil acidity, it was hypothesized that the pillbugs would prefer the acidic chamber (the one with HCl), over the caustic (with KOH) and neutral chambers. The data collected supports the hypothesis. The mean number of pill bugs in each chamber was calculated by totaling the pillbug count for all twenty-one times in one chamber and then doing the same for the next chamber and then dividing the two totals by the total number of pillbugs counted. This number was 210 in each case. As evidenced by Table 4 and Figure 4, the mean number of pillbugs in the damp chamber over ten minutes was approximately 5.143, and the mean number of pi llbugs in the dry chamber over ten minutes was approximately 4.857. The higher average of the damp chamber over the dry chamber shows taxis toward the stimulus (moisture). The data collected also supported the second part of what was hypothesized. The mean number of pillbugs in the chamber with light paper was about 4.429. Table 5 and Figure 5 show the mean number of pillbugs in the dark chamber to be about 5.571. The results and the known habitats of pillbugs are consistent with one another. The data collected in part three of the experiment did not support what was hypothesized. Table 6 and Figure 6 show that the basic environment (one with drops of KOH) was actually preferred over a neutral environment and the acidic environment (one with drops of HCl) by the pillbugs. The mean number of pillbugs in the neutral environment was about 3.33, for the acidic environment the mean was about 1.429 and for the caustic environment the mean was about 5.238. Its possible the explanation for these results is the vapor pressure of the Hydrochloric acid being higher than that of the Sodium Hydroxide. Irritation caused by HCL vaporizing quickly and getting into the pillbugs gills would explain the lack of time spent in the chamber with the HCl on the filter paper. The lack of moisture on the plain filter paper could explain the lack of time spent in the neutral chamber. The pillbugs antennae would sense any chemical or something like it, and they would be attracted to that chamber. Ag nostic behavior was exhibited by the pillbugs inside the choice chambers. Fighting between the pillbugs represents agnostic behavior. The results of the experiment would not be affected by errors in counting or other human errors. The data collected from the experiment supported two thirds of what was hypothesized. The pillbugs preferences for dark and damp environments over light and dry environments were supported by the results. However, the results suggest that pillbugs preference is for the more caustic environments over the environments that are neutral or acidic. Citations 1. Brown, Courtney Jane. ADW: Armadillidium Vulgare: Information. Animal Diversity Web. Web. 24 Mar. 2011. . 2. Lab # 11 Animal Behavior (College Board, 2001) APÃ ® Biology Lab Manual for Students (2001) New Jersey: College Board. p. 125-131. 3. Isopod, Pillbug, Sow Bug Information. UA Center for Insect Science Education Outreach. Web. 24 Mar. 2011. . 4. Soil PH and Soil Acidity or Alkalinity. Landscaping and Lawns by Donnan Landscape. Web. 24 Mar. 2011. . 5. HYDROCHLORIC ACID (LESS THAN 10%). New Mallinckrodt Baker Website. Web. 24 Mar. 2011. . 6. What Is Acidic Soil? Web. 24 Mar. 2011. . 7. Vapor Pressure. Test Page for Apache Installation. Web. 24 Mar. 2011. . 8. The MSDS HyperGlossary: Vapor Pressure. Transferring You to the ILPI Home Page Web. 24 Mar. 2011. .
Tuesday, September 3, 2019
Crime Essay example -- essays research papers
Crime Crime happens all over the world every second of every day. Thus making numerous amounts of victims. Crime victims are all around us even though we may not know it or think about it. According to the crime clock every twenty-five point three seconds a motor vehicle theft occurs. Have you ever thought what it would be like to walk away from you car, even after you have locked it, and to not be able to see it or the things inside it ever again? Motor vehicle theft happens every day in every neighborhood. à à à à à I never realized it prior to this assignment but I live with victims of crimes right in my own townhouse on school property. My housemate Anne was generous enough to tell me her story. à à à à à As Anne recalls it her story begins last semester when she borrowed her sisters car to get back to school. She remembers parking the car in the top commuter parking lot. Anne distinctly remembers locking the doors and heading down to her townhouse for the night. When Anne went to use the car Saturday morning it was gone. There was no car in sight. The first thing Anne did was go straight to public safety. They could not help Anne so she called the Reading Police Department immediately. The officers came about two hours later and made a report, leaving Anne with nothing to do but pray they find the car and the person who stole it. à à à à à Anne recalls the worst thing about the situation was having to call her sister and tell her the story. Anneââ¬â¢s sister Mandy truly understood and simply made a call to the insurance company to see if reimbursements were possible. Nothing else was heard about the car or the perpetrator until the Wednesday after the incident, almost a week later. à à à à à Mandy received a call informing her the CUMRU township police had found her car Friday night, immediately after the incident, crashed on the side of the road. Mandy of course inquired as to why she had not been contacted for so many days only to find out that the Reading Police Department had not put the theft into the computer system leaving all other departments unknowledgeable about the incident. à à à à à Overall, the victim here was truly victimized. Not only did Mandy have to pay for the impound fees from Friday to Wednesday because no one had known the car was found on Friday but she also had to cover all towing fees. The impound fees alone were over $300. Mandy ... ... any sort of compensation from the government that could be awarded to motor vehicle theft victims that are not covered under insurance. If not, possibly we should be looking into it. Obviously since no offender was located restitution is not an option. There should be some other way of helping out the victims. à à à à à There are so many ways to look at every crime. You can always think of a different point as to who was responsible for the crime or whether or not everyone did what he or she had to do to solve the mystery of the crime to the best of their ability. A lot of emotions are involved in any crime no matter how small. Whether or not anyone involved in any crime will ever be completely satisfied by the results or whether or not we ever decide in society as a whole who we are going to blame for crimes is uncertain. You can be certain that everyone just wishes it never happened to him or her. Its obvious that humanity as a whole would be much better off without crime however this is also obviously unrealistic!! ââ¬Å"Every society gets the kind of criminal it deserves. What is also true is that every community gets the kind of law enforcement it insists on.â⬠John F Kennedy
Character Traits of Chris McCandless of Into The Wild Essay -- Into th
Christopher Johnson McCandless is a respectable man in so many ways but, yet such a foolish man in many others. Chris McCandless possessed a seemingly ever-lasting bravery that constantly shined through his unique and matchless character. He was very righteous in himself to the point in which he kept himself from any sin or evil, committing his life to what seemed like an idea of celibacy, not just in refraining from any desire of flesh but also in all lusts of life with his diligent power of will that constantly shined through his exterior. Onto the contrary of his good characteristics, McCandless remained to be very foolish in his decisions and under takings, whether it be by his arrogance of sheer narrow mindedness. Over all he was a boy of many talents and knowledge, with a bright soul and good heart but, still somewhere in the depths of his thoughts he lacked something that made him think things through, and in this his foolishness he would lose his life. As stated previously, McCandless had a deep bravery that protected him from the darkness of fear or negative thought. Never once in this story does he seem frightened in that he might lose his life, grow ill or become hurt, and in one way he proves this by his insatiable habit of hitchhiking, I mean, with all do respect he could have been picked up by a serial killer and that probably would have cut his adventure a little short. In addition, he does not cower to much of anything, his bravery led him to some pretty interesting place such as digging dead rats from farm equipment, diving waist deep in grime, muck, and not to mention stench, that is if you would consider all of that to be brave. Set aside the trivial matter, his true bravery is shown... ...lse in his former life. In review McCandless was a man with boyish and romantic ambitions or maybe he was a boy with an intellectual mind stuck in the body of a man, because that theory would certainly exist as plausible in describing his foolish ways. Let us not forget that Chris did have a truly unique idea with good intention and maybe he did accomplish what he set out for, true inner peace with himself and the world around him maybe he did find himself in this whole ordeal. Yes McCandless was a bright soul but, in the end his foolishness or maybe even it was his bravery lead him to his demise, his lonely death in starvation. With all of this said was McCandless brave or was he foolish and stupid, well, for certain he never acted in any stupid way, but he did act in both foolishness and bravery because in many ways it takes quite some foolishness to be brave.
Monday, September 2, 2019
INBM Essay
Catch of the day Kalastaa Inc. have been in the local Finnish aquaculture industry for nearly fourteen years. They raise salmon and trout for local markets, and have recently negotiated a deal with a small fish processing plant that distributes under a major product label in Finland. Although they run a rather small operation, employing 16 people year-round, Kalastaa believes they are in a position to export some surplus and perhaps broker further deals with fish processing plants around the European Union. They do want to maintain ties with the local fresh fish markets, but sales have been steadily decreasing since the sudden influx of cheaper Scottish salmon on the market. They know their stock is of higher quality and could be exported abroad quite profitably. Kalastaa has contacted the government and enrolled in small business export initiatives. This has enabled the company to attend aquaculture conferences abroad and offered them the opportunity to network and make contact with DanskFisk, a Dut ch importer. Plenty more fish in the sea? DanskFisk was eager to negotiate a contract for 2 tonnes of Finnish salmon to distribute to a number of clientele throughout the country. Payment of credit was arranged by a Dutch bank. The documents required were a commercial invoice, the insurance policy, a marine bill of lading, and a certificate of quality. Kalastaa has arranged to have their fish inspected by a nationally accredited standards organization. Both parties agree in their contract that Kalastaa will pay freight to Rotterdam and will also insure the shipment. Once the salmon has been delivered, DanskFisk will assume all responsibility. The Finish Food Inspection Agency reports to Kalastaa that the fish to be exported is of superior quality, with a fat content of 11 percent. Theà certificate of quality includes a code for superior quality and also states a color code that is standard to the Salmofan scale. Colour coding is a common practice in the fish industry and provides a method of standardization for something as subjective as colour. Both in production and sales, colour is the most important quality parameter for salmon. Salmon buyers can request information on the colour of a delivered lot in the form of a number corresponding to a colour number on the Roche scale. Another salmon colour reference is the colour number on the Salmofan scale. Kalastaaââ¬â¢s bank, acting as their export advisor, contacts theà company to tell them that the letter of credit has fallen though because the certificate of quality is vague and it cannot be ascertained if the shipment has passed its quality certification. Somethin g is fishyâ⬠¦ The documents were delivered directly to the buyer for payment. DanskFisk insists on inspecting the shipment upon arrival. DanskFisk is not an experienced salmon importer, and usually deals with Spanish Blue Fish and Irish Char. They are not in disagreement that the salmon shipment has passed quality inspection. Upon DanskFiskââ¬â¢s inspection, they claim that the fat content of the stock is much higher than is claimed in the quality inspection. They reject the sale and will accept substitute goods, but are claiming damages for loss of profit. Kalastaa management wonder if they need to rethink their exporting strategy. Case Study Discussion Questions 1.à Which shipping vessels would be most appropriate for Kalastaa to ship their product to Rotterdam? 2.à Describe the purposes for each of the export documents that Kalastaa need to provide to secure documentary credit. 3.à Which Incoterm would best represent the terms of sale between Kalastaa and DanskFisk? 4.à Would Kalastaa have benefited from employing a freight forwarder? Explain.
Sunday, September 1, 2019
Cookie Clicker Cheats Userscript Essay
// ==UserScript== // @name Cookie Clicker Cheats // @namespace http://userscripts.org/users/zackton // @description Enable/Disable different cheats/hacks for Cookie Clicker // @include http://orteil.dashnet.org/cookieclicker/ // @include orteil.dashnet.org/cookieclicker/ // @updateURL http://userscripts.org/scripts/source/176985.meta.js // @require http://userscripts.org/scripts/source/187400.user.js // @require http://userscripts.org/scripts/source/276064.user.js // @icon http://images2.wikia.nocookie.net/__cb20130827014914/cookieclicker/images/5/5a/PerfectCookie.png // @grant none // @run-at document-end // @version 1.7 // ==/UserScript== // Main wait loop setTimeout(doSomething, 1000); function doSomething() { var element = document.getElementById(ââ¬Ëparticle0ââ¬â¢); if (typeof (element) != ââ¬Ëundefinedââ¬â¢ && element != null) { //Game particles have loaded, FIRE AWAY! (function () { var options = { panelId: ââ¬Ëcookie-cheaterââ¬â¢, intervalDelay: 1, longDelay: 250, buttons: { ââ¬ËbigCookieââ¬â¢: { label: ââ¬ËAutoclick Big Cookieââ¬â¢, action: function () { toggleAutoAction(ââ¬ËbigCookieââ¬â¢, function () { Game.ClickCookie(); }) } }, ââ¬ËspawnGoldenCookieââ¬â¢: { label: ââ¬ËSpawn a Golden Cookieââ¬â¢, action: function () { Game.goldenCookie.life = 0; Game.goldenCookie.time = Game.goldenCookie.minTime; Game.goldenCookie.spawn(); } }, ââ¬ËautoGoldenCookieââ¬â¢: { label: ââ¬ËAutospawnclick GCsââ¬â¢, action: function () { toggleAutoAction(ââ¬ËautoGoldenCookieââ¬â¢, function () { if (Game.frenzy 0) { Game.goldenCookie.last = ââ¬Å"blood frenzyâ⬠} else { Game.goldenCookie.last = ââ¬Å"frenzyâ⬠} Game.frenzy = 1 } if (Game.frenzy > 0) { Game.goldenCookie.toDie = 1 } if (Game.goldenCookie.life >= 0 && (Game.frenzy 0)) { Game.goldenCookie.click(); } }) } }, ââ¬ËautoBuyUpgradesââ¬â¢: { label: ââ¬ËAutobuy Upgradesââ¬â¢, action: function () { toggleAutoAction(ââ¬ËautoBuyUpgradesââ¬â¢, function () { buyUpgrades(); }) } }, ââ¬ËfuckThemWrinklersââ¬â¢: { label: ââ¬ËSlaughter Wrinklersââ¬â¢, action: function () { toggleAutoAction(ââ¬ËfuckThemWrinklersââ¬â¢, function () { setTimeout(function() { for (var i in Game.wrinklers) { var me=Game.wrinklers[i]; if (me.phase==2) { me.hurt=1; me.hpââ¬â; var x=me.x+(Math.sin(me.r*Math.PI/180)*100); var y=me.y+(Math.cos(me.r*Math.PI/180)*100); for (var ii=0;ii 0) {Game.seasonPopup.click()}},Math.floor(((Math.random()*7)+3)*2500)); }) } }, } }; addStyleSheet(); addPanel(); for (var name in options.buttons) { if (!options.buttons[name]) { return; } addButton(name, options.buttons[name].label, options.buttons[name].action); } function buyUpgrades() { for (var i = 0; i < Game.UpgradesById.length; i++) { if ((i > 63 && i < 75) || i === 79 || (i > 82 && i < 86) || i === 91 || i === 124 || (i > 140 && i < 143) || i === 167 || (i > 181 && i < 186)) { continue; } else { if (Game.UpgradesById[i].unlocked === 1) { if(Game.cookies >= Game.UpgradesById[i].basePrice) { Game.UpgradesById[i].buy(); } } } } } //Lets bind some keys!!! //Buys one of specified building Mousetrap.bind(ââ¬Ëshift+1ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 11].buy(); }); //Cursor Mousetrap.bind(ââ¬Ëshift+2ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 10].buy(); }); //Grandma Mousetrap.bind(ââ¬Ëshift+3ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 9].buy(); }); //Farm Mousetrap.bind(ââ¬Ëshift+4ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 8].buy(); }); //Factory Mousetrap.bind(ââ¬Ëshift+5ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 7].buy(); }); //Mine Mousetrap.bind(ââ¬Ëshift+6ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 6].buy(); }); //Shipment Mousetrap.bind(ââ¬Ëshift+7ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 5].buy(); }); //Alchemy Lab Mousetrap.bind(ââ¬Ëshift+8ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 4].buy(); }); //Portal Mousetrap.bind(ââ¬Ëshift+9ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 3].buy(); }); //Time Machine Mousetrap.bind(ââ¬Ëshift+0ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 2].buy(); }); //Antimatter Condenser Mousetrap.bind(ââ¬Ëshift+-ââ¬Ë, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 1].buy(); }); //Prism //Sells one of specified building Mousetrap.bind(ââ¬Ëoption+1ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 11].sell(); }); //Cursor Mousetrap.bind(ââ¬Ëoption+2ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 10].sell(); }); //Grandma Mousetrap.bind(ââ¬Ëoption+3ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 9].sell(); }); //Farm Mousetrap.bind(ââ¬Ëoption+4ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 8].sell(); }); //Factory Mousetrap.bind(ââ¬Ëoption+5ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 7].sell(); }); //Mine Mousetrap.bind(ââ¬Ëoption+6ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 6].sell(); }); //Shipment Mousetrap.bind(ââ¬Ëoption+7ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 5].sell(); }); //Alchemy Lab Mousetrap.bind(ââ¬Ëoption+8ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 4].sell(); }); //Portal Mousetrap.bind(ââ¬Ëoption+9ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 3].sell(); }); //Time Machine Mousetrap.bind(ââ¬Ëoption+0ââ¬â¢, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 2].sell(); }); //Antimatter Condenser Mousetrap.bind(ââ¬Ëoption+-ââ¬Ë, function() { Game.ObjectsById[Game.ObjectsById.length ââ¬â 1].sell(); }); //Prism // Awesome textParticle mod, mostly for execution of ââ¬Å"Cookie Clicker Cheats v.X.X launched!â⬠message. Game.textParticlesAdd = function (text, el) { //pick the first free (or the oldest) particle to replace it var highest = 0; var highestI = 0; for (var i in Game.textParticles) { if (Game.textParticles[i].life == -1) { highestI = i; break; } if (Game.textParticles[i].life > highest) { highest = Game.textParticles[i].life; highestI = i; } } var i = highestI; var x = (Math.random() ââ¬â 0.5) * 40; var y = 0; //+(Math.random()-0.5)*40; if (!el) { var rect = l(ââ¬Ëgameââ¬â¢).getBoundingClientRect(); var x = Math.floor((rect.left + rect.right) / 2); var y = Math.floor(((rect.bottom)) ââ¬â 60); x += (Math.random() ââ¬â 0.5) * 40; y += 0; //(Math.random()-0.5)*40; } var me = Game.textParticles[i]; if (!me.l) me.l = l(ââ¬Ëparticleââ¬â¢ + i); me.life = 0; me.x = x; me.y = y ââ¬â Game.textParticlesY; if (me.y < 60) { for (var j = 0; j
Subscribe to:
Posts (Atom)